SDL-PD1428A-12L   电磁铁   汽车灯变光用 丰田锐志主用

DC12V/0.9A-1.88A
性能优劣：
1. 电磁铁盖板为10号钢，导磁性能佳，撞击性好，长年使用无损 ；
2. 盖板活动轴灵活，反应速度快；            
3. 电磁铁的线轴采用美国杜邦材料耐高温耐磨损 ；
4. 电磁铁温升-50～250℃其吸力仍稳定安全可靠；
5. 电磁铁温升-50～250℃其弹簧弹力仍稳定；
6. 高频运行时盖板活动稳定，无抖晃现象
7. 耐高压可达到1500V～1800V/2MA左右
8. 电磁铁的线圈是采用德国漆包线绕制而成。
9. 电磁铁的线圈导电性好、耗电少、发热量低、耐温180℃、最高可达250℃。
10. 制作电磁铁使用的所有材料采均采用环保处理，无毒，无污染，安全可靠。
11. 保持式电磁铁采用优质磁铁，磁铁吸力稳定，安全可靠
12. 电磁铁支架正常运行100万次以上不脱落
13. 电磁铁在合理环境中，寿命可以长达5年以上

SDL-PD1428A-12L electromagnet carlights dimmer with Toyota Reiz primary
DC12V/0.9A-1.88A
Performance advantages and disadvantages :
1 solenoid cover 10 gauge steel , good magnetic properties , impactresistance, long using non-destructive ;
2 -axis flexible cover activities , fast response ;
3 electromagnet spools DuPont materials using high temperature wearresistance ;
4 solenoid temperature -50 ~ 250 ℃ which suction is still stable and safe andreliable ;
5 -50 ~ 250 ℃temperature electromagnet which spring force is still stable;
6 high-frequency operation cover activities stable, no flutterphenomenon
7 high pressure can reach 1500V ~ 1800V/2MA
8 solenoid coils are made ofenameled wire used in Germany .
9 electromagnet coils good conductivity, low power consumption ,low heat , temperature 180 ℃, up to 250 ℃.
10 All materials used in mining production electromagnets are usedenvironmental treatment , non-toxic, safe and reliable.
11 Keep Solenoid high quality magnets, magnet suction stable,secure and reliable
12. Solenoid bracket normal operation does not fall more than 1million times
13 electromagnet at a reasonable environment, life can be up to 5years